1. Apply scope
The machine is for cutting the open type angle steel and for typing & punching the steel plate. It is mainly used for angle steel cutting, typing and punching, and for steel plate typing and punching.
2.Structure and capability
The angle cutting mold of this machine is righ-angle double-edged, helicoids (manual or electric) all-orientation. It is possible to adjust the helicoids mold to meet the change of the cutting angle of the angle steel, and punching system. When print and punching are needed, it can be carried through only to take down the corner cutting mold and fix the print and punching system. (punching mold can be collected with haplopore, diplopore and multiorifice diameter mold.) The laser projection device makes the cutting angle more accurant and more convenient.
3. Basic specifications
|
No. |
Item name |
Unit |
YQJ-1614 Standard |
YQJ-2016 Standard |
|
1 |
Presser nominal pressure |
KN |
800 |
1000 |
|
2 |
Oil cylinder stroke |
mm |
50 |
50 |
|
3 |
Time of stroke |
Min |
20-25 |
20-25 |
|
4 |
Motor power |
KN |
11 |
15 |
|
5 |
Max. length & thickness of cutting |
mm |
L160х160х12 single cut
L140х140х12 double cut |
L200х160х12 single cut
L160х160х12 double cut |
|
6 |
Turning angle of cutting mold |
|
±360° |
±360° | |
